Automating Production Process Data Acquisition Towards Spaghetti Chart 4.0

Automation of logistics and production processes is one of the significant goals of the Industry 4.0 movement. Thus, this study uses the automatic data acquisition approach to automatically create Spaghetti Charts (SC), decrease the required time spent on collecting data, and provide a fast analysis (feedback). Smartphone technology used for drawing the automated spaghetti diagram has potential drawbacks related to safety, security, the privacy of organizations, and independency. So, Method Time Measurement 4.0 and RStudio software are used to collect the real data and draw the spaghetti chart, respectively, as an alternative solution. The experiment results for four scenarios (different Facility layouts and processes) prove that the approach is competitive, with cycle time reduction exceeding 40% less than the conventional facility layout and process plan. The proposed solution of the wearable device is promising for replacing smartphone technology with smart spaghetti chart systems

Chiasma

Newspaper reporting on events at the Boston University School of Medicine in the 1960s

Conductive Cooling of SDD and SSD Front-End Chips for ALICE

We present analysis, technology developments and test results of the heat drain system of the SDD and SSD front-end electronics for the ALICE Inner Tracker System (ITS). Application of super thermoconductive carbon fibre thin plates provides a practical solution for the development of miniature motherboards for the FEE chips situated inside the sensitive ITS volume. Unidirectional carbon fibre motherboards of 160 -300 micron thickness ensure the mounting of the FEE chips and an efficient heat sink to the cooling arteries. Thermal conductivity up to 1.3 times better than copper is achieved while preserving a negligible multiple scattering contribution by the material (less than 0.15 percent of X/Xo)

Disentangling diverse responses to climate change among global marine ecosystem models

Climate change is warming the ocean and impacting lower trophic level (LTL) organisms. Marine ecosystem models can provide estimates of how these changes will propagate to larger animals and impact societal services such as fisheries, but at present these estimates vary widely. A better understanding of what drives this inter-model variation will improve our ability to project fisheries and other ecosystem services into the future, while also helping to identify uncertainties in process understanding. Here, we explore the mechanisms that underlie the diversity of responses to changes in temperature and LTLs in eight global marine ecosystem models from the Fisheries and Marine Ecosystem Model Intercomparison Project (FishMIP). Temperature and LTL impacts on total consumer biomass and ecosystem structure (defined as the relative change of small and large organism biomass) were isolated using a comparative experimental protocol. Total model biomass varied between −35% to +3% in response to warming, and -17% to +15% in response to LTL changes. There was little consensus about the spatial redistribution of biomass or changes in the balance between small and large organisms (ecosystem structure) in response to warming, an LTL impacts on total consumer biomass varied depending on the choice of LTL forcing terms. Overall, climate change impacts on consumer biomass and ecosystem structure are well approximated by the sum of temperature and LTL impacts, indicating an absence of nonlinear interaction between the models’ drivers. Our results highlight a lack of theoretical clarity about how to represent fundamental ecological mechanisms, most importantly how temperature impacts scale from individual to ecosystem level, and the need to better understand the two-way coupling between LTL organisms and consumers. We finish by identifying future research needs to strengthen global marine ecosystem modelling and improve projections of climate change impacts

Test and commissioning of the CARLOS control boards for the ALICE Silicon Drift Detectors

This paper presents the test strategy employed during the installation of the CARLOS end ladder boards developed for the Silicon Drift Detectors (SDD) of ALICE. Each CARLOS board compresses the data provided by the front-end electronics of one SDD and sends them via an optical link of 800 Mbit/s to the data concentrator card (CARLOSrx) located in the counting room. The paper describes the integration of the CARLOS boards in the final SDD system, including its cooling and mechanical support, the power supply distribution and the optical interconnections. The results of the tests performed after each step of the installation sequence are reported

Phenol composition and antioxidant capacity of red wines produced in Central Italy changes after one-year storage

Much interest is currently concentrated on phenol compounds and antioxidants of wine. The aim of this study was to characterize and evaluate controlled designation of origin (CDO) and typical geographical indications (TGI) red wines from Central Italy and to evaluate possible modifications after one year of storage. The total phenol content and antioxidant activity by ORAC method were determined, while phenolic qualitative and quantitative profiles were evaluated by HRGC-FID or HPLC-DAD. All wines showed a good content of total phenols and an obvious antioxidant effect. After a one-year storage in the bottle, a significant decrease (P<0.05) of the ORAC values was observed for TGI wines. Interesting correlations between phenol and ORAC values for CDO wines were found. It can be confirmed that one-year storage in the bottle has not significantly affected the quality of the wines analyzed, in particular the CDO category

Feasibility studies of time-like proton electromagnetic form factors at PANDA at FAIR

Simulation results for future measurements of electromagnetic proton form factors at \PANDA (FAIR) within the PandaRoot software framework are reported. The statistical precision with which the proton form factors can be determined is estimated. The signal channel $\bar p p \to e^+ e^-$ is studied on the basis of two different but consistent procedures. The suppression of the main background channel, $\textit{i.e.}$ $\bar p p \to \pi^+ \pi^-$, is studied. Furthermore, the background versus signal efficiency, statistical and systematical uncertainties on the extracted proton form factors are evaluated using two different procedures. The results are consistent with those of a previous simulation study using an older, simplified framework. However, a slightly better precision is achieved in the PandaRoot study in a large range of momentum transfer, assuming the nominal beam conditions and detector performance

Technical Design Report for the PANDA Solenoid and Dipole Spectrometer Magnets

This document is the Technical Design Report covering the two large spectrometer magnets of the PANDA detector set-up. It shows the conceptual design of the magnets and their anticipated performance. It precedes the tender and procurement of the magnets and, hence, is subject to possible modifications arising during this process.Comment: 10 pages, 14MB, accepted by FAIR STI in May 2009, editors: Inti Lehmann (chair), Andrea Bersani, Yuri Lobanov, Jost Luehning, Jerzy Smyrski, Technical Coordiantor: Lars Schmitt, Bernd Lewandowski (deputy), Spokespersons: Ulrich Wiedner, Paola Gianotti (deputy

Two-pion Bose-Einstein correlations in central Pb-Pb collisions at sNN\sqrt{s_{\rm NN}} = 2.76 TeV

The first measurement of two-pion Bose-Einstein correlations in central Pb-Pb collisions at $\sqrt{s_{\rm NN}} = 2.76$ TeV at the Large Hadron Collider is presented. We observe a growing trend with energy now not only for the longitudinal and the outward but also for the sideward pion source radius. The pion homogeneity volume and the decoupling time are significantly larger than those measured at RHIC.Comment: 17 pages, 5 captioned figures, 1 table, authors from page 12, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/388